Hot Wax Warmer Cleaner Electric Waxing Kit for Body Foot Hand Skin Hair Removal Melting Pot Wax Machine with Hard Wax Beans Wax Applicator Sticks(Pink) Review

Hot Wax Warmer Cleaner Electric Waxing Kit for Body Foot Hand Skin Hair Removal Melting Pot Wax Machine with Hard Wax Beans Wax Applicator Sticks(Pink)

  • Suitable for all types of hair removal and All types of waxes, including paraffin, this electric warmer can also be used on all forms of waxes.
  • FDA approved–The wax bean is FDA Approved which is safer than others,The wax kit for hair removal is safe to use with the wooden chips without burning your skin while using the melted wax. The see-through cover gernerates the heat on the wax, accelerating the wax melting and preventing the wax contamination by dust.
  • SAFE AND EASY TO USE: High-temperature automatic shut – off device, the wax warmer equips a wide range of c from 160℉ to 240℉ ( the wax will heat up faster than normal wax warmer).It will stop working and light off when the temperature up to 240℉, melting point of wax beans is 160℉(also the keep warm temperature), and it will start working and lighting again when temperature under 160℉,You can choose the melt temperature for the specific wax you use.
  • SAFETY ABS MATERIAL—Upgraded durable ABS heat assistant material, high quality temperature resistant plastic. No scalding hazard, saves energy and safe. Painless and Anti-allergic. We guarantee the quality!
  • WAX KIT INCLUDES—Wax Warmer 500 ml (1 unit), Large Size Wooden Spatulas / Applicators (20pieces), 5 packs of different favor hard wax beans (Lavender,Rose, ), 1 x Operation Instructions

The product is plug-in power, there is no built-in battery.Do not worry about the dangers of using the battery.
If want faster melting, turn the wax warmer on and adjust the dial to 240¨Hthe highest temperature for time-saving and fast melting.

☆For sensitive areas (like eyebrows), areas of loose skin, or areas with coarse hair: Apply the wax in narrow, thick strips. Let the wax harden before removal. Pull off the wax quickly in the direction of hair growth.
☆Note: If wax is applied in a layer that’s too thin, the strip will break apart and will be difficult to remove.

How to use?
1. Put the hard wax into inner bucket, and then close the warmer with lid.
2. Turn the temperature control knob to “HI”, it will keep heating until the hard wax have melt, this process will lasts about 10 minutes.
3. Use wax applicator stick to apply some wax on your skin along with the hair growth direction.
4. Wait until the wax become concretionary, grip the edge of the wax and tear it off against the hair growth direction quickly.

Notice:
1. Do not go to swim or be under the blazing sun within 24 hours after using, or have shower right after using.
2. Do not drop wax machine into water or any liquid.

Clean Tip:
Pour some preferred cleaner such as fragrance oil into the container to dissolve the wax, and use a scraper or spatula to remove stubborn bits of wax. Then use paper towel to wipe corners of the wax pot to make sure deep clean.

Specifications:
Machine Material: ABS
Rated Voltage: 110V
Power: 100W
Capacity: 500cc
Machine Size: Approx. 18 * 18cm*14cm / 7.1*7.1* 5.5inch

Package Content:
1 x Wax Heater Pot
5 x 5 Difference Flavors(FDA Approved )(Rose, Lavender,Black Currant, Aloe vera,Strawberry)
1 x Plastic Lid
1 x Aluminum Container
1 x User Manual